Welcome to visit: Dongguan Metal Surface Treatment Technology Co.,Ltd.

这是描述信息

WhatsApp Mobile Wechat:+86 18825852529

LANGUAGE
1  1 1
Current:
Homepage
/
/
/
[Defect resolution] The gravure is worn too fast, what's the matter? How to solve it?

TECHNICAL

Check category

[Defect resolution] The gravure is worn too fast, what's the matter? How to solve it?

[Defect resolution] The gravure is worn too fast, what's the matter? How to solve it?

Information
【Abstract】There are three main reasons that cause the printing plate to wear too fast, namely, the chrome layer is too soft, the pressure of the doctor blade is too large, and the problem of the plate roller turning dark. How to solve the problem of too fast printing plate wear caused by these three reasons?
 
【text】
 
Reason 1: The chrome layer is too soft.
 
Measures: Re-chrome plating to control the hardness of the chrome layer.
 
 
 
Reason 2: The scraper pressure is too heavy, mechanical pressure is used for illegal operation.
 
Measures: Reduce the pressure of the squeegee, and do not use mechanical pressure for illegal operations. If you have to use a heavy squeegee due to other printing quality problems, it is recommended to find out the cause of the printing quality problem and find a solution.
 
 
 
Reason three: The eccentricity of the plate roller is large when the plate roller is installed, which leads to running bounce and periodic pressure wear.
 
Measures: Control the degree of eccentricity of the plate roller, the method depends on the machine speed, and the control is within ±0.1mm below 150m/min.

Technology Center

Previous page
1

Online Message

Username used for comment:
客户留言
Description:
验证码

WhatsApp Mobile Wechat:

+86 18825852529

Email:

metal@cjab.cn sarah.zheng@cjab.cn

WhatsApp
Dongguan Maituo Surface Treatment Technology Co., Ltd.
Dongguan Maituo Surface Treatment Technology Co., Ltd.

COPYRIGHT © 2021 ALL RIGHTS RESERVED  Dongguan Metal Surface Treatment Technology Co.,Ltd. Powered by www.300.cn 粤ICP备18106959号